Back

Qubino Z-Wave Plus Flush 1 Relay Switch and Energy Monitor ZMNHAD3 Supply

Original price was: $51.95.Current price is: $31.17.

SKU: US-5815482974367 Categories: ,
Description

Description

Qubino Z-Wave Plus Flush 1 Relay Switch and Energy Monitor ZMNHAD3

[shortdesc]

[/shortdesc]

Not sure if you switched your lights off before leaving home? With Qubino smart home solutions you can check if your lights are on or off and control them using your smartphone.

 

  • WHAT DOES IT DO? Install it behind your wall switch for Z-Wave wireless control. Great for lights, exhaust fans, or ceiling fans up to 10 Amps.
  • WHAT ELSE DO I NEED? Check for NEUTRAL wire in the electrical box (VERY IMPORTANT). You’ll need a Z-Wave hub for wireless control. Basic on/off functionality will work on any Z-Wave hub (NOT Z-Wave alarm panels) but you’ll need a compatible hub for advanced features and energy reports (scroll down for details). Alexa / Google Home is NOT a Z-Wave hub.
  • WHY NOT GET A WALL SWITCH? So you can keep your favorite toggles or specially designed switches on the wall without having to compromise for the limited style options of Z-Wave wall switches. Connect Qubino’s digital temperature sensor (sold separately) to get additional functionality of a hard-wired thermometer.
  • HOW IS IT BETTER? Made in Italy from top quality components that will last. If your Z-Wave hub support energy monitoring (Wink and alarm panels DON’T), you’ll be able to track power for the device connected to the relay. Set up the built-in timer for the relay to automatically turn off after being in use for too long. It will also remember and restore the on/off status after power failure.

 

SPECIFICATIONS:

      • Model Number: ZMNHAD3
      • Z-Wave Signal Frequency: 908.42 MHz
      • Power: 120 VAC
      • Maximum Load: 10 A (2300 W when powered by 120 VAC)
      • Power Consumption: 0.4 W
      • Z-Wave Range: Up to 130 feet line of sight
      • Operating Temperature: 14-104° F
      • Installation and Use: Indoor only
      • Dimensions: 1.6″ x 1.4″ x 0.6″
      • Weight: 1 oz

COMPATIBLE HUBS:

Do NOT buy if your controller is not listed below. Contact Seller first.

    • Domoticz
    • Fibaro Home Center Lite
    • Home Assistant
    • HomeSeer
    • Samsung SmartThings Hub with custom device handler – Contact Seller for Instructions
    • VeraEdge
    • VeraPlus
    • VeraSecure
    • Wink
    • Z-Wave Me

     

    Technical specifications

    Power supply 110 – 240 VAC ±10%
    50/60Hz, (24-30 VDC)
    Rated load current of AC output (resistive load)* 1 X 10A / 240 VAC
    Rated load current of DC output (resistive load) 1 X 10A / 30 VDC
    Output circuit power of AC output (resistive load) 2300 W (240 VAC)
    Output circuit power of DC output (resistive load) 240 W (24 VDC)
    Power measurement accuracy P = 5–50 W, +/-3 W
    P > 50 W, +/-3%
    Digital temperature sensor range
    (sensor must be ordered separately)
    -25°C~+80°C (-13~ 176°F), resolution 0.1°C
    Operation temperature -10° ~ +40°C (14 ~ 104°F)
    Distance up to 30 m indoors (98 ft)
    Dimensions (WxHxD) 41.8 x 36.8 x 15.4 mm / 1,65×1,45×0,66 in
    (packaging) 74 x 43 x 86 mm / 2,91×1,69×3,39 in
    Weight (including packaging) 24 g (50 g) / 0.85oz (1.76oz)
    Electricity consumption 0.4 W
    For installation in boxes Ø ≥ 60 mm (2,36 in) or 2M, depth ≥ 60 mm (2,36 in)
    Switching Relay
    Z-Wave Repeater Yes

    * In case of loads other than resistive loads, please pay attention to the value of cos φ. If necessary, connect loads less powerful than what they’re rated for – this applies to all motor loads. Max current for cos φ=0,4 is 3A at 250VAC, 3A at 24VDC L/R=7ms.

    Supported Z-Wave Frequencies

    ORDERING CODE (MODELING NUMBER) Z-WAVE FREQUENCY
    ZMNHAD1 868.4 MHz
    ZMNHAD2 921.4 MHz
    ZMNHAD3 908.4 MHz
    ZMNHAD4 869,0 MHz
    ZMNHAD5 916,0 MHz
    ZMNHAD6 868,4 MHz
    ZMNHAD7 919,8 MHz
    ZMNHAD8 865,2 MHz
    ZMNHAD9 922,5 MHz
    ZMNHADA 919,7 – 921,7 – 923,7 MHz
    ZMNHADB 868,1 MHz
    ZMNHADC 868,1 MHz
    ZMNHADD 919,8 MHz
    ZMNHADE 920,9 MHz

    ===

    In The Box:

    • 1 x  1 Flush Relay
    • 1 User Manual

     

    Installation videos:

    • Socket

     

    • Switch

    • Smart Pool

    • Smart Irrigation

    Shipping & Delivery

    We accept returns on non-sale items that are in original packaging, unused, and unwashed within 30 days of receipt. Please follow our returns/exchanges process below. If items do not meet our requirements for return, they will be shipped back to you in lieu of a refund. Shipping and handling charges are non-refundable (exceptions may apply).

    Returns & Exchanges Process: If item(s) fit within our returns guidelines found in the Returns. Please allow 7-10 business days for the credit to appear on your account after your return is processed.