Description
Qubino Z-Wave Plus 0-10 V Dimmer ZMNHVD3 for LED Low Voltage Dimmable Fixtures (Hub Required)
[shortdesc]
[/shortdesc]
Are your lights powered by a LED driver 0-10V? Are you looking for a solution to control them wirelessly, using your smartphone from your comfortable sofa? The Qubino Flush Dimmer 0-10V gives you an opportunity to connect your lights, running on 0-10V, to a smart home system, and control them wirelessly.
- WHAT DOES IT DO? The only Z-Wave 0-10 V dimming controller. Connect it to a 0-10 LED driver for remote Z-Wave control of your low-voltage fixtures.
- WHAT ELSE DO I NEED? A 12-24VDC power supply to power the module. If you’re adding manual control from a wall switch, make sure it’s either a momentary push-button switch or a simple on/off switch, NOT a dimmer (VERY IMPORTANT). You’ll need a compatible Z-Wave hub for wireless control (scroll down for details). Alexa is NOT a Z-Wave hub.
- WHY NOT GET A WALL Z-WAVE DIMMER? So you can actually control your low-voltage lights! Regular Z-Wave wall switches won’t play well with LED drivers with 0-10 V control so you won’t be able to use them here at all.
- HOW IS IT BETTER? Made in Italy from top quality components that will last. It’s extremely small and will fit very tight cans. If your Z-Wave hub supports advanced parameter input (you’ll need a custom handler for SmartThings), you’ll be able to set minimum and maximum dimming levels, adjust the ramp rate or add double-click to full brightness.
Features:
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 12-24 VDC
- Max Sinking Control Voltage: -20/ +20VDC
- Max Sourcing Control Voltage: 0-11VDC
- Power Consumption: 0.5 W
- Z-Wave Range: Up to 130 feet line of sight
- Operating Temperature: 14-104° F
- Installation and Use: Indoor only
- Dimensions: 1.6″ x 1.4″ x 0.6″
- Weight: 1 oz
COMPATIBLE HUBS:
Do NOT buy if your controller is not listed below:
- Fibaro Home Center Lite
- Home Assistant
- HomeSeer
- Samsung SmartThings Hub with custom device handler – Contact Seller for Instructions
- VeraEdge
- VeraPlus
- VeraSecure
Technical specifications
| Power supply | 12 – 24 VDC* |
| Max. sinking control voltage | -20 / +20 VDC |
| Max. sourcing control voltage | 0 – 11 VDC |
| Accuracy | <3% FS |
| Max. sinking current | 2 mA |
| Max. sourcing current | 7 mA |
| Digital temperature sensor range (sensor must be ordered separately) |
-25°C~+80°C (-13~ 176°F), resolution 0.1°C |
| Operation temperature | -10° ~ +40°C (14 ~ 104°F) |
| Distance | up to 30 m indoors (98 ft) (depending on building materials) |
| Dimensions (WxHxD) | 41.8 x 36.8 x 15.4 mm / 1,65×1,45×0,66 in |
| (packaging) | 74 x 43 x 86 mm / 2,91×1,69×3,39 in |
| Weight (including packaging) | 18 g (44 g) / 0.63oz (1.55oz) |
| Electricity consumption | 0.5 W |
*SELV Type
Supported Z-Wave Frequencies
| ORDERING CODE (MODEL NUMBER) | Z-WAVE FREQUENCY |
| ZMNHVD1 | 868.4 MHz |
| ZMNHVD2 | 921.4 MHz |
| ZMNHVD3 | 908.4 MHz |
| ZMNHVD4 | 869,0 MHz |
| ZMNHVD5 | 916,0 MHz |
| ZMNHVD6 | 868,4 MHz |
| ZMNHVD7 | 919,8 MHz |
| ZMNHVD8 | 865,2 MHz |
| ZMNHVD9 | 922,5 MHz |
| ZMNHVDA | 919,7 – 921,7 – 923,7 MHz |
| ZMNHVDB | 868,1 MHz |
| ZMNHVDC | 868,1 MHz |
| ZMNHVDD | 919,8 MHz |
| ZMNHVDE | 920,9 MHz |
===
In the Box:
- 1 x Controller
- 1 x User Manual
